Loudspeaker Crossover Settings Reference
Here you'll find reference guidance on crossover settings for loudspeaker systems. It explains how frequency ranges are split across drivers and cabinets, so every component only handles the band it was built to reproduce.
Frequently Asked Questions on Crossover Settings
What are crossover settings, exactly?
Crossover settings define the frequency points at which a loudspeaker system hands signal from one driver or cabinet to the next — for example, the handover between subwoofers and mid/high enclosures. They are one part of the wider system configuration covered here.
Where does the crossover data on this page come from?
The crossover settings reference on this page is embedded straight from Funktion-One, and that embedded source is the authoritative reference for the values shown.
How do crossover settings relate to limiter settings?
Crossover settings and limiter settings are separate parts of the same system configuration. Besides this crossover page, The Vault also hosts a dedicated limiter settings page.
Where can I find the related Funktion-One documentation?
The Vault brings together the related materials — the Funktion-One manual, the Funktion-One PEN licence and the HP System Engineer Cert4 pages — all reachable through the site navigation.
Who should I contact about this reference material?
Contact details are listed in the site footer, including the published email address and phone number.
Get in Touch
If you have questions about this reference material, you can email us or call using the details published in the footer.
Email UsCrossover settings work alongside limiter settings and the rest of the system configuration to keep each driver within its intended range. Use this reference together with the Funktion-One manual and the related Vault pages when setting up or checking a system.